软件和固件存档

Improvements

• Improved reporting of battery errors

Notes

• Command Strings
• To operate SBRC version 1.1.5 with other Shure software, see the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Wireless Workbench 6.13.0

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

改进功能

• 修复漏洞
• 修复画外音

已知问题

• 一小部分用户在记录时可能会收到数字错误消息，例如“-1”或“66570”。这些消息发生在设备写入出错时，并且与苹果的新文件系统(APFS)有关。即使您的设备有足够的剩余存储空间，也可能发生这些错误之一。我们建议从设置界面清除你的设备存储，如果这还不能解决问题，从iTunes做一个完整的恢复，包括备份你的设备，清除/恢复到出厂设置，并从备份中恢复。
• 如果你用蓝牙耳机监听你的录音，你可能会在监听时听到人为的声音，比如噪音。如果发生这种情况，我们建议改变您的录音采样率。一些产品可能产生44.1kHz的人工制品，而其他产品可能产生48kHz的录音制品。请记住，即使您在监视时听到了工件，它们也不会出现在录音本身中。
• 当通过USB-C线缆连接到iPad Pro时，MV88+将通过音频并可调整增益。然而，MOTIV应用程序将只显示“外部麦克风”，设置屏幕将不可用。Shure建议在使用iPad Pro之前，先使用另一台设备来配置这些设置。使用iPad Pro时，Shure MOTIV应用程序不能实时调整(增益除外)。

说明

• MV88+ 用户手册
• MV88 用户手册
• 常见问题
• 本应用程序兼容iOS 11.3或更高版本，但强烈建议升级到iOS 12.1或更新版本
• 兼容iPhone、iPad和iPod touch

Improvements

• Bug fixes
  • Fixed audio/video sync issues
  • Fixed an issue with dropped frames in recordings

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• Users of iPhone 8 who are running iOS 11.3 may experience crashes when playing back saved recordings from within the app.
• iPhone XS Max users may experience visual misalignment issues after focusing on an object and then zooming in.
• In rare cases, recordings will begin with a half-second of silence before the audio starts. However, the audio will remain in sync with the video, and will not run past the end of the video frames.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

• MOTIV Video User Guide
• MV88+ Video User Guide
• MV88 User Guide
• Supports iPhone 5S and later – iPad and iPod Touch are not supported
• Compatible with iOS 11.3 or later

Release notes cover the following models:

• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN

Important

• This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS CCU, CU 5905, CU 6105, or CU 6110 Central Units.
• Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• Firmware Upgrade Utility (FUU) v1684, which is included in the release, is required to update MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix.

New Features

DIS-CCU (6000 Mode)

• Support for Dual delegate role
• Real-time diagnostics for MXC units:
  • Loop problem (due to cable or unit failure)
  • Unit offline/online status
  • Low voltage level
  • Alerts appear in the event log
• DCS-LAN network topology information for MXC units
• Activation of LED indication for units in chain and in loop
• Save and restore CCU settings
• TPCI commands showing when interpreter audio is present on interpreter channels

MXCMIU

• Support for Dual Delegate role when used with two MXCMIU-FL/FS front plates connected to the HDMI A and B connectors (supports dual microphones, dual loudspeakers, dual LEDs)

MXC615

• Support for Dual Delegate role

MXC620

• Support for Dual Delegate role (except NFC ID card functionality)

MXC640

• Support for Dual Delegate role (except NFC ID card functionality)
• Participant speech timer appears on MXC640 screen when used with SW6000 software
• Ability in SW6000 software to allow all participants with a specific role (e.g. Delegate) to view or hide the speak/request list on their MXC640 screen
• Chairman can start/stop meetings on MXC640 (meetings must be set up in SW6000 software)
• Support for 2-button (Yes/No) voting in standalone mode without SW6000 software
• Ability to upload startup screen image/logo via Firmware Update Utility
• Support for up to 1000 agenda items
• 3 additional screen languages (Thai, Turkish, Lithuanian added; brings total to 17)

MXCIC

• Interpreter can view the Speak/Request list on MXCIC screen (when used standalone or with SW6000)
• "Slow" button now active
• Language Pre-select control behavior changed: Language selection is now activated on release of a pre-select button, in addition to clicking the rotary button to confirm. Also, pressing or turning the rotary button while holding a pre-select button launches the pre-select language list.

Improvements

MXC640

• Improvements to result note display
• All language-based properties at meeting end
• Info in the top menu is updated

Bug Fixes

DIS-CCU

• Corrected a bug where seat numbers were not sorted in the Participant Setup page

MXC640

• Corrected bugs where
  • it was not possible to set a subject active
  • the Speak button LED does not blink when unit is next in the request list in FIFO mode
  • the unit language is not changed back to system language after the user is logged out or after stopping the meeting

Known Issues

• When the system uses SW6000, voting result labels in TCP/IP control strings are shifted.
• During boot up, there may be a spike on the analog output.
• Some units in systems >150 units may not be shown in the Topology report.
• Some units may reset when cable breaks in a loop on an EX 6010 unit.
• The Event log in DIS-CCU CGUI does not work when SW6000 is connected and a meeting is started.
• MXC640
  • When an agenda with max. items and with max. words in the item name and descriptions is received, the GUI may not be responsive for a period of time
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled
  • Re-doing an attendance check might make the attendance button nonoperational
  • The percent indication in the Voting Result screen may not be correct for user-specified voting configurations
• MXCMIU
  • The Exclusive button does not work if configured to the function button (left button)

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with release version 8.5.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • DCS 6000 8.5.0
  • SW6000 6.8.33a
  • Shure NFC Programming App 1.0.3

重点信息

• 此版本可用于先前所有SW6000版本的升级，但不适用于采用CU 6005、CU 6010或CU 6011中央单元系统的升级
• 此版本仅与SW6000软件许可证文件v1.7兼容
• 从SW6000 v6.0.xxx或更高版本升级时，不需要新的SW6000许可证
• 如果从SW6000 v5.8.xxx或以前的版本升级，则需要新的SW6000许可证

修复错误

安装程序

• 用户可能无法在未装有SQL的PC上安装。 如果路径长度超过256个字符，则SQL Server安装将失败；如果Setup.exe文件的路径超过47个字符，则会显示错误消息。
• 升级某些SQL数据库失败。

CUA

• 从Mimic登录参会者不会将话筒衰减应用于硬件单元
• “替换单元”生成“序列包含多个元素”的系统消息
• 如已从CAA配置中删除设备，则在重新启动CUI之前口译无法工作

CAA

• 参会者会议报告：标签号无效
• 尝试在MXCIC中将B语言设置为“-”时系统崩溃

CUI

• MXC640上不显示单个演讲时间

已知问题

• CAA和CUA中未实现对C语言的完全支持
• CAA：带有大型客户数据库的会议日志报告超时
• CUA：按下按钮后，在“准备会议”上未指示正确的CDA显示。
• CDA：如果取消投票，则不会清除会议变量

说明

• SW6000 and DCS 6000 Compatibility Chart
• 请注意，安装SW6000仍需要管理员权限。
• 自2019年7月起不再支持SQL Server 2008和2008 R2（完整版和快速版）。强烈建议升级至较新的数据库。

IMPORTANT

• To update Shure Update Utility version 2.4.3 or earlier to version 2.4.5, download and re-install from www.shure.com/SUU or through Help > Check for Shure Update Utility updates.

IMPROVEMENTS

• Added support for new frequency bands:
  • Axient Digital
    • Japan: 1240 – 1260 MHz (Z16)
  • PSM1000
    • USA and Canada: 518 – 584 MHz (H22)
• Updated branding
• Updated help system with new design

KNOWN ISSUES

• PSM1000 devices with firmware version 1.1.0 or earlier must use Shure Update Utility version 2.4.1 or older.
  • Version 2.4.1
    • 32-bit Windows 7, 8, 10
    • 64-bit Windows 7, 8, 10
    • 64-bit Mac OS X 10.10-10.12
  • Previous Versions
• Selecting "Help" > "Check for Shure Update Utility updates" will open Shure.com, which offers the latest version of Shure Update Utility to download. Shure Update Utility version 2.4.2 or greater will not automatically detect new versions.
• 32-Bit Windows:
  • To update Shure Update Utility version 2.2.2 or earlier on a 32-bit Windows system, download version 2.4.2 or greater for 32-bit systems to re-install the software. Older versions of Shure Update Utility will not detect new updates of Shure Update Utility that support 32-bit systems.
  • Shure Update Utility version 2.4.5 for 32-bit systems is compatible with Wireless Workbench 6 version 6.12.1 and earlier.
• Attempts to download ULXD6/8 transmitter firmware to a ULX-D or QLX-D receiver that is not at the minimum firmware version, shown below, will fail. To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  • Update receivers to the following minimum versions:
    • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
    • QLXD4 Receivers 2.1.5
  • Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  • Using the FW Update menu on a receiver, update transmitters.
• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.
• USB-C MacBook Pro laptops with the Touch Bar running macOS High Sierra and Mojave will fail to discover GLX-D devices. We are currently investigating this issue.

NOTES

• Shure Update Utility is supported on the following operating systems:
  • Windows 7, 8 and 10
  • macOS Sierra (10.12), High Sierra (10.13), and Mojave (10.14)
• Installing Shure Update Utility on Windows will also prompt the installation of a USB driver, which must be installed to support updating USB devices, such as GLX-D.
• USB 2.0 Devices
  • KSE1500, SHA900, and GLX-D must be updated one-at-a-time.
  • USB hubs are not recommended when updating USB 2.0 connected devices. Always connect these devices directly to a USB on the computer running Shure Update Utility.
• Shure Update Utility 2.4.2 or greater for 64-bit systems is compatible with Wireless Workbench 6.12.2 or later.
• Shure Update Utility 2.4.2 or greater for 32-bit systems is compatible with Wireless Workbench 6.12 or earlier.

IMPROVEMENTS

• Bug fixes

NOTES

• User Guide
• MV88+ User Guide
• Compatible with Android 6.0 and higher.
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.