软件和固件存档

IMPROVEMENTS

Bug fixes

KNOWN ISSUES

A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.

If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

NOTES

• MV88+ User Guide
• MV88 User Guide
• Frequently asked questions
• This app is compatible with iOS 11.3 or later but upgrading to iOS 12.1 or newer is strongly recommended.
• Compatible with iPhone, iPad, and iPod touch

IMPROVEMENTS

• Fixed an issue that could cause the MV88+ to crash
• Fixed an issue where the microphone LED would intermittently flash an amber light
• Fixed an issue for iOS users where the mic would occasionally not be recognized by the device when plugged in

Known Issues

• Users with some Android devices may experience 9 millisecond audio drop-outs when recording with the MV88+
• In a small number of instances, unplugging the MV88+ from an iPhone XS, XS Max, or XR can cause the phone to crash and reboot. This is due to an Apple bug that is being investigated and should be resolved in an upcoming iOS release
• When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• User Guide

新功能

高级区域管理：区域功能增强之后，用户能够更仔细地考虑区域关系，现在可将区域关系配置为遵循频道到频道或频道间互调间隔。

• 在您需要的频率超过Wireless Workbench计算器能够找到的频率时，以及在您使用包含多个独立空间的场所时，不妨考虑使用区域。
• 区域改变了Wireless Workbench计算和分析频率的方式，不应纯粹用于组织目的。要让频率保持有序，请使用标记。

在线电视频道数据库搜索（仅限美国）：通过KeyBridge Global提供的获得FCC许可的数据库，增加对电视台实施在线搜索的支持。

改进功能

• 增加了对macOS Mojave（10.14版本）的支持

新设备和频段支持

• 适用于ULX-D的新频段V52
• 适用于QLX-D的新频段V52
• 适用于PSM1000的新频段X55
• 适用于PSM900的新频段X55
• 增加了对适用于SVX的新频段M18的支持
• 增加了对适用于BLX的新频段H11的支持
• 增加了对PGX-D频段X8、X8A和X8B的支持
• 增加了对Audix AP41和AP61系统的支持

稳定

• 尝试删除Timeline中的最后一个可用视图选项卡时，WWB不再崩溃
• 在某些ULX-D设备中启用Timeline或Mini-Timeline时，WWB不再崩溃
• 更新当前存在于目录中的自定义设备配置文件时，WWB不再崩溃
• 在某种场景下保存Timeline后，WWB不再冻结
• 在某种场景下尝试调整Coordination Chooser对话框的大小之后，WWB不再冻结
• 在选择不同的网络接口卡(NIC)并快速回到激活的Timeline之后，WWB不再崩溃

性能

• 改善了“监控”视图中的集中计量表响应
• 提高了大量添加到“监控”视图中时“通道条”的显示速度
• 提高了“应用程序首选项”对话框打开的速度
• 提高了生成“目录报告”、“固件和网络摘要报告”的速度
• 在没有使用3T3O互调产品的情况下，提高了频率计算和分析的速度
• 改善了Timeline数据写入和绘图性能

联网

• 应用程序启动期间导致显示错误的网络设备，对这一网络接口选择过程进行了改进

目录

• 在“目录”选项卡中对AD4Q频率的更改不再影响到其他通道
• “目录组/通道”下拉菜单中不再列出适用于ULXD6和ULXD8发射机的重复通道
• 现在针对“自定义设备配置文件”能够可靠地显示“目录”中的频率值
• “目录表”按照“设备ID”进行排序不再错误地将括号[ ]当做“设备ID”中的字符
• 通过重新排列项目，改善了目录行的快捷菜单

频率协调

• 更新了适用于以下国家/地区的离线电视数据：奥地利，芬兰，美国
• 更新了德国用户组
• 更新了“排除项”对话框的布局，以降低创建和查看单个频率和频率范围排除项的难度
• 在“分配和部署”对话框中添加了“dBm”等级
• 移除了“暂停”和“恢复”控制，并将它们整合到“协调工作区”的“停止计算”部分
• 重新计算时，“调整排除阈值”不会再创建重复频率排除项
• “在电视频道数据库中搜索”不再拒绝逗号分隔符后有一个空格的地理坐标
• 从WWB发送至AXT600频谱管理器的数据不会再因为电视格式不同而引发冲突

监控

• 增加了一个在关闭“监控”视图时会出现的“确认”对话框，以防意外关闭
• Ad4接收机的属性面板现在显示“话筒/线路”和“接地/悬浮”状态，以显示在设备处于FD-C或Quadversity模式时，是否存在冗余输出
• 处于Quadversity模式时，AD4Q的属性面板不再显示错误的Dante通道名称
• 与ULXD1和ULXD2发射机配合使用时，QLXD的属性面板现在会在“通道条”中正确显示“发射机静音”警报
• 多台设备均离线时，SBC220和SBC240的某些属性值现在会保存在这些设备的“属性面板”中
• SBC240的“属性面板”现在允许在设备数量超过允许的最大成组设备数量时访问“设备设置”
• 当警报不再有效时，现在“警报”文本会从某些充电器的“属性面板”中移除
• 在某个场景的“首选项”中，如果“低电量警报”被禁用，现在“硬件警报”对话框中也会将其移除
• 现在，除了“通道条”之外，在“监控”选项卡的“Device Chooser”中拖放通道行还会创建“Mini-Timelines”
• 将射频功率作为“通道条”小部件的组件添加

Timeline

• 添加了WWB或Timeline意外退出时对“Timeline文件恢复”的支持
• 现在保存的Timeline文件默认文件名中包含选项卡名称和日期时间
• 将“电池充电百分比”添加为“Timeline电池数据流”中的一个选项
• 针对电池错误添加了“Timeline系统事件”
• 现在，“通道条接收机/发射机控制”部分中的“发射机设备ID”在其处于离线，而另一个发射机要覆盖其ID时保持更新
• 现在，当视图转变为一个空槽，小部件隐藏起来，然后重新显示时，ShowLink数据会在Mini-Timeline中正确的发射机槽中显示
• 现在，使用搜索栏搜索“Timeline用户标记”会考虑“标记描述”字段中的文本
• “打开Timeline”不会在打开时，默认再创建一个0字节文件

基本规格

• 添加了应用程序的温度单位首选项（摄氏度或华氏度）
• 增加了能够在“属性面板”的“设备设置”中“启用/禁用访问控制”的功能
• 在“固件和网络摘要报告”中，添加了MAC地址字段
• 不再禁用Mac中的“调整对话框大小”选项
• Mac中的下拉菜单的尺寸不再过小或过大
• AXT400中的某些“IR预设”在“冲突设置”对话框被忽略时，不再自动支持“WWB”
• 将“Flash”操作更名为“Identify”，但仍然触发联网设备，让它们的显示器和LED闪烁
• 在一种场景中，600 MHz转换实用程序不会在Mac OS上无法转换发射机
• “通道条”现在会在保存的“演出记录文件”中保留选定的“接收机/发射机控制”页面

已知问题

• 运行2.0.28或更早版本固件的ULX-D接收机在固件更新至2.1或更高版本后，重新发现设备可能触发“设置冲突”。设备本身并没有问题——只是2.1版本新增加的一项属性而已。要解除警报，请选择要保留的属性，来解决此“设置冲突”
• 某些便携式腰包与SBC220（P3RA、 P9HW和UR5）不兼容，因而不能通过WWB远程监控充电状态和其他属性。使用SBC220时这些便携式腰包仍可进行充电，只是不能通过WWB查看电池充电百分比或其他属性
• 在某些特定频道出现过载的情况下，ULX-D接收机报告的“音频合并”会报告所有频道都出现“音频过载”，而不会指出特定频道
• 使用Axient Digital FD-Override（在FD-S中，选择锁定至Rx 1/2/自动开关）时，如果两个FD通道都未显示，则会出现“Timeline系统事件”
• 设备首次上线时，登录的警报可能会列出设备参数及各项值，因为即便参数值本身未发生变化，也会被警报发现
• 主列表模式下的SLX和ULX频率无法在协调工作区中手动输入。但能对它们进行协调和分析
• 在Windows中，当计算机的显示器比例没有设置为默认值时，通道条的某些组件可能隐藏不显示。救急方法：关闭该应用程序，右键点击应用程序的可执行文件，选择“兼容”选项卡，然后选择“覆盖高DPI缩放行为”复选框，然后在“执行缩放项”下拉菜单中选择“系统（增强型）”。这会防止应用程序显示的缩放比例增高或降低，但是可以保证整个“通道条”可见

说明

• 要顺利运行Wireless Workbench软件，您必须以管理员身份登录。（如有疑问，请咨询IT部门。）
• 打开较旧版本Wireless Workbench创建的演出记录文件时，可能会在文件加载后出现“设置冲突”对话。这是因为，已更新的固件版本中引入了新支持的硬件参数。要保留演出记录文件的所有设置，请选择“保留所有设置：Wireless Workbench”

重要信息

• 此版本可用于先前所有SW6000版本的升级，但不适用于采用CU 6005、CU 6010或CU 6011中央单元系统的升级
• 此版本仅与SW6000软件许可证文件v1.7兼容
• 从SW6000 v6.0.xxx或更高版本升级时，不需要新的SW6000许可证
• 如果从SW6000 v5.8.xxx或以前的版本升级，则需要新的SW6000许可证

新功能

CUI

• 取消“以管理员身份运行”的限制

CAA

• 会议角色议程设置现包含在一个弹出窗口中。该设置包括以下新选项：

           o 查看请求发言、投票结果、超链接和主题状态的图标
           o 在议程中查看请求发言列表
           o 请求发言的控制与查看选项

• 会议/选项窗口现包括议程选项
• 现已支持多个同时运行的Web服务连接
• 将参与者分配至议程中每个主题的请求发言列表
• 取消“以管理员身份运行”的限制

CUA

• 在“参与者”屏幕中设置参与者代理关系的选项
• 取消“以管理员身份运行”的限制
• CUA外观设置从prjCUA.exe.config文件移动到子文件夹Resources中的外观文件中
• 如果主题中存在投票结果、简短和完整描述，则自动显示在议程中
• 如果窗格未激活，则通过覆盖窗格全屏显示日程视图
• 通过在子文件夹Resources中使用外观文件来改进议程视图；以下为可配置项：

           o 每个议程的字体/颜色/大小
           o 包括任何主题的简短描述，而不仅仅在1级
           o 包括任何主题的完整描述
           o 包括任何主题的议程时间
           o 议程级别、简短与完整描述的最大行数
           o 主题之间的行数（显示/不显示、颜色和厚度）
           o 主题之间的距离
           o 请求发言、投票结果、超链接和主题状态的图标
           o 边距
           o 对于任何主题的请求发言列表，最多包含3列，并带有排序选项。

              排序选项使用“Group”表中定 义的排序（“Sort”）顺序

• “议程”屏幕中的请求列表窗格：

            o 显示所选主题的发言请求列表
            o “参与者”选项：

                1,请求发言
                2,查看自己的请求及状态
                3,查看所有已批准请求
                4,移除自己的请求

            o “控制”选项（基于会议角色）

                1,添加参与者
                2,批准
                3,拒绝
                4,移除
                5,改变列表顺序

CDA

• 取消“以管理员身份运行”的限制
• 口译系统状态：

           o 面向技术人员的同传间频道列表
           o 公共频道列表
           o 单个同传间的同传通道语言

已知问题

• CAA和CUA中未实现对C语言的完全支持

说明

• SW6000 and DCS 6000 Compatibility Chart
• 请注意，安装SW6000仍需要管理员权限。

Recommendation

Update all Audio Network Interfaces in a configuration to the newest firmware versions.

Improvement

• Fix for web server performance issues

Known Issues

• After updating from version 2.X to 3.1.6, Channel EQ settings return to their default settings.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
• The Mute Control Function command string response is incorrect when using <GET 0 ALL>
  • When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
  • When using < GET 0 ALL >, the response should be mapped as follows:

Notes

• User Guide
• New Demo Web UI
• Command Strings
• MXA310 version 3.1.6 is compatible with MXA310 devices running version 3.1.6 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 3.1.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 3.1.6 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 3.2
  • Shure SystemOn 3.2
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 3.1.6
  • MXA910 4.0.12
  • Microflex Wireless 6.0.3
  • P300 IntelliMix® Audio Conferencing Processor 3.1.6
  • ULXD4D/4Q 2.3.34
  • SCM820 1.3.3
  • Shure Update Utility 2.4.4
  • Shure Web Device Discovery 1.2.5

Recommendation

Update all Audio Network Interfaces in a configuration to the newest firmware versions.

Improvement

• Fix for web server performance issues

Known Issues

• After updating from version 2.X to 3.1.6, Channel EQ settings return to their default settings.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
• The Mute Control Function command string response is incorrect when using <GET 0 ALL>
  • When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
  • When using < GET 0 ALL >, the response should be mapped as follows:

Notes

• User Guide
• New Demo Web UI
• Command Strings
• MXA310 version 3.1.6 is compatible with MXA310 devices running version 3.1.6 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 3.1.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 3.1.6 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 3.2
  • Shure SystemOn 3.2
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 3.1.6
  • MXA910 4.0.12
  • Microflex Wireless 6.0.3
  • P300 IntelliMix® Audio Conferencing Processor 3.1.6
  • ULXD4D/4Q 2.3.34
  • SCM820 1.3.3
  • Shure Update Utility 2.4.4
  • Shure Web Device Discovery 1.2.5

Recommendation

Update all Audio Network Interfaces in a configuration to the newest firmware versions.

Improvement

• Fix for web server performance issues

Known Issues

• There is the potential for a loss of audio after a power cycle when using Static IP setting: Un-checking and re-checking the Dante connections is necessary to reestablish audio between devices. An Alternative fix is to use DHCP addressing.
• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 3.1.6 is compatible with ANIUSB-MATRIX devices running version 3.1.6 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 3.1.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX version 3.1.6 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 3.2
  • Shure SystemOn 3.2
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 3.1.6
  • MXA910 4.0.12
  • Microflex Wireless 6.0.3
  • P300 3.1.6
  • ULXD4D/4Q 2.3.34
  • SCM820 1.3.3
  • Shure Update Utility 2.4.4
  • Shure Web Device Discovery 1.2.5

Improvements

• Support for MXA910 firmware version 4.0.12 with IntelliMix® DSP
• Bug fixes

Known Issues

• Discovering MXW microphones may take more than 1 minute
• If a single location has more than 32 devices, the audio metering quality will decrease
• UTC time and date are displayed on Event Log and Email/SMS notifications.
• Navigating through an Event Log with hundreds of events may be slow or could cause the system to time out.
• For non-English users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required.
• If a valid license activation ID is applied and fails on the first attempt, please try again before calling support.

Notes

• To operate SystemOn 3.2 with Shure networked systems, see the following list of supported firmware versions:
  • SCM820 1.3.3
  • ULX-D 2.2.24 – 2.3.34
  • MXW 5.2.2 – 6.0.3
  • MXA910 3.15 – 4.0.12
  • MXA310 3.1.5
  • P300 3.1.6
  • ANIUSB-MATRIX 3.1.5
  • SBC220/240 1.1.43 – 1.1.62
  • SBC250/450/850 2.2.24 – 2.3.6
• Please report SystemOn performance issues experienced on supported browsers to Shure Support.
• For help and troubleshooting, go to the SystemOn User Guide or FAQs

*****

UPDATE: Oct 15, 2019: Designer 3.2 supports P300 devices updated to version 3.1.8.

*****

IMPORTANT

• When upgrading Designer versions, the installer will prompt that the destination folder C:\Program Files\Shure\Shure\Shure Designer is not empty; please change the Shure Designer folder name (e.g. Shure Designer 3.1) or delete the existing Shure Designer folder and it will automatically be re-created during the upgrade.
• In order to push from virtual devices to online devices, or vice versa, the virtual device and online version must be of the same version. For example, all new virtual MXA910s created in Designer 3.2 are on version 4.0.12; those virtual devices can only be associated with online devices that are also on firmware version 4.0.12.

IMPROVEMENTS

• Support for MXA910 firmware version 4.0.12 with IntelliMix® DSP
• Bug fixes

KNOWN ISSUES

• When using MXA910 4.0.12 firmware, the Sync Status between the virtual and online device will appear as ‘Not Synced.’
• If no NIC is selected, some features on virtual devices may not work as expected, e.g. deleting lobes from virtual MXA910s; select a NIC to fix the issue.
• When using Windows 7, no more than five windows can be open simultaneously.
• Templates that were created from a location will be empty when the project is exported and then imported. This does not affect locations that were not copied to templates.
• With more than 20 devices in location or 60 on the network, some actions will take longer due to increased network traffic.
• When pushing to many devices, the status may incorrectly show that the push failed. For most devices, if the Sync Status changes from ‘Not Synced’ to ‘Synced’, then the push was successful. However, with MXA910 version 4.0.12, the status will always say ‘Not Synced.’
• When deleting a virtual device, Designer will warn that encryption and password settings will be changed; however, the discovered devices’ encryption and password settings will not be affected.
• When working with virtual devices and presets, channel names do not revert to default values when “Restore Default Settings” is clicked, and location may take time to respond.
• In Coverage Map, changing the unit of measurement will not be saved for the location; the unit of measurement will default to feet when the location is reopened.                                          When importing a Designer preset file into the MXA910 web application, attempts to immediately export that file out of the web application will fail if it is not first loaded and saved to the MXA910.
• When changing an exported project file name and attempting to import the project file, an error message may appear although the project was successfully imported; switch tabs or close and re-open the app to view the project.

NOTES

• Internet access is required during the installation process
• Designer User Guide
• System Requirements
• Designer 3.2 is compatible with the following firmware versions:
  • MXA310 version 3.1.5
  • MXA910 version 4.0.12
  • P300 version 3.1.6
  • ANIUSB-MATRIX version 3.1.5
• Requires 64-bit Windows 7, 8.1 or 10

Improvements

• Support for logic functionality with MXA910 version 4.0.12 firmware

Notes

• User Guide
• Command Strings
• To operate P300-IMX version 3.1.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate P300-IMX version 3.1.6 with other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 3.2
  • Shure SystemOn 3.2
  • ANI22 2.0.18
  • ANIUSB-MATRIX 3.1.5
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 3.1.5
  • MXA910 4.0.12
  • Microflex Wireless 6.0.3
  • Shure Update Utility 2.4.4
  • Shure Web Device Discovery 1.2.5