软件和固件存档

Release notes cover the following models:

• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN

Important

• This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS CCU, CU 5905, CU 6105, or CU 6110 Central Units.
• Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• Firmware Upgrade Utility (FUU) v1684, which is included in the release, is required to update MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix.

New Features

DIS-CCU (6000 Mode)

• Support for Dual delegate role
• Real-time diagnostics for MXC units:
  • Loop problem (due to cable or unit failure)
  • Unit offline/online status
  • Low voltage level
  • Alerts appear in the event log
• DCS-LAN network topology information for MXC units
• Activation of LED indication for units in chain and in loop
• Save and restore CCU settings
• TPCI commands showing when interpreter audio is present on interpreter channels

MXCMIU

• Support for Dual Delegate role when used with two MXCMIU-FL/FS front plates connected to the HDMI A and B connectors (supports dual microphones, dual loudspeakers, dual LEDs)

MXC615

• Support for Dual Delegate role

MXC620

• Support for Dual Delegate role (except NFC ID card functionality)

MXC640

• Support for Dual Delegate role (except NFC ID card functionality)
• Participant speech timer appears on MXC640 screen when used with SW6000 software
• Ability in SW6000 software to allow all participants with a specific role (e.g. Delegate) to view or hide the speak/request list on their MXC640 screen
• Chairman can start/stop meetings on MXC640 (meetings must be set up in SW6000 software)
• Support for 2-button (Yes/No) voting in standalone mode without SW6000 software
• Ability to upload startup screen image/logo via Firmware Update Utility
• Support for up to 1000 agenda items
• 3 additional screen languages (Thai, Turkish, Lithuanian added; brings total to 17)

MXCIC

• Interpreter can view the Speak/Request list on MXCIC screen (when used standalone or with SW6000)
• "Slow" button now active
• Language Pre-select control behavior changed: Language selection is now activated on release of a pre-select button, in addition to clicking the rotary button to confirm. Also, pressing or turning the rotary button while holding a pre-select button launches the pre-select language list.

Improvements

MXC640

• Improvements to result note display
• All language-based properties at meeting end
• Info in the top menu is updated

Bug Fixes

DIS-CCU

• Corrected a bug where seat numbers were not sorted in the Participant Setup page

MXC640

• Corrected bugs where
  • it was not possible to set a subject active
  • the Speak button LED does not blink when unit is next in the request list in FIFO mode
  • the unit language is not changed back to system language after the user is logged out or after stopping the meeting

Known Issues

• When the system uses SW6000, voting result labels in TCP/IP control strings are shifted.
• During boot up, there may be a spike on the analog output.
• Some units in systems >150 units may not be shown in the Topology report.
• Some units may reset when cable breaks in a loop on an EX 6010 unit.
• The Event log in DIS-CCU CGUI does not work when SW6000 is connected and a meeting is started.
• MXC640
  • When an agenda with max. items and with max. words in the item name and descriptions is received, the GUI may not be responsive for a period of time
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled
  • Re-doing an attendance check might make the attendance button nonoperational
  • The percent indication in the Voting Result screen may not be correct for user-specified voting configurations
• MXCMIU
  • The Exclusive button does not work if configured to the function button (left button)

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with release version 8.5.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • DCS 6000 8.5.0
  • SW6000 6.8.33a
  • Shure NFC Programming App 1.0.3

Improvements

• Bug fixes
  • Fixed audio/video sync issues
  • Fixed an issue with dropped frames in recordings

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• Users of iPhone 8 who are running iOS 11.3 may experience crashes when playing back saved recordings from within the app.
• iPhone XS Max users may experience visual misalignment issues after focusing on an object and then zooming in.
• In rare cases, recordings will begin with a half-second of silence before the audio starts. However, the audio will remain in sync with the video, and will not run past the end of the video frames.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

• MOTIV Video User Guide
• MV88+ Video User Guide
• MV88 User Guide
• Supports iPhone 5S and later – iPad and iPod Touch are not supported
• Compatible with iOS 11.3 or later

改进功能

• 修复漏洞
• 修复画外音

已知问题

• 一小部分用户在记录时可能会收到数字错误消息，例如“-1”或“66570”。这些消息发生在设备写入出错时，并且与苹果的新文件系统(APFS)有关。即使您的设备有足够的剩余存储空间，也可能发生这些错误之一。我们建议从设置界面清除你的设备存储，如果这还不能解决问题，从iTunes做一个完整的恢复，包括备份你的设备，清除/恢复到出厂设置，并从备份中恢复。
• 如果你用蓝牙耳机监听你的录音，你可能会在监听时听到人为的声音，比如噪音。如果发生这种情况，我们建议改变您的录音采样率。一些产品可能产生44.1kHz的人工制品，而其他产品可能产生48kHz的录音制品。请记住，即使您在监视时听到了工件，它们也不会出现在录音本身中。
• 当通过USB-C线缆连接到iPad Pro时，MV88+将通过音频并可调整增益。然而，MOTIV应用程序将只显示“外部麦克风”，设置屏幕将不可用。Shure建议在使用iPad Pro之前，先使用另一台设备来配置这些设置。使用iPad Pro时，Shure MOTIV应用程序不能实时调整(增益除外)。

说明

• MV88+ 用户手册
• MV88 用户手册
• 常见问题
• 本应用程序兼容iOS 11.3或更高版本，但强烈建议升级到iOS 12.1或更新版本
• 兼容iPhone、iPad和iPod touch

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

Improvements

• Improved reporting of battery errors

Notes

• Command Strings
• To operate SBRC version 1.1.5 with other Shure software, see the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Wireless Workbench 6.13.0

IMPROVEMENTS

• Bug fixes

NOTES

• User Guide
• MV88+ User Guide
• Compatible with Android 6.0 and higher.
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.

BUG FIXES

• USB mute sync improvements
• General bug fixes

NOTES

• User Guide
• Command Strings
• To operate P300-IMX version 3.1.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate P300-IMX version 3.1.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 3.2
  • Shure SystemOn 3.2
  • ANI22 2.0.18
  • ANIUSB-MATRIX 3.1.6
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 3.1.6
  • MXA910 4.0.12
  • Microflex Wireless 6.0.3
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5

新功能

操作系统级别警报通知：“硬件警报”和“干扰事件”功能增强，即使在Wireless Workbench最小化的情况下，用户也能通过操作系统接收通知。

• 对于Mac用户，Wireless Workbench警报和事件将显示在右上方、带有操作系统级别的通知，并且可以在“通知中心”查看。
• 对于Windows用户，Wireless Workbench警报和事件将显示在系统任务栏右下方、带有操作系统级别的通知，并且可以在“操作中心”查看。

改进功能

• 增加了对macOS Catalina（10.15版本）的支持

新设备和频段支持

• 增加了对新舒尔频段的支持

          H22 for PSM1000

          H22 for PSM900

          Axient Digital：X56和Z16

          SVX：H14和G15

          BLX：H10E和J11

• 增加了对Sennheiser Digital 6000的支持
• 增加了对AKG DMS800的支持

稳定

• 在某个场景中，更改频率分集(FD)模式时，WWB不再崩溃。
• 从Timeline中选择ULX-D的某些频段时，WWB不再崩溃。
• 在某个场景中，删除离线设备时，WWB不再崩溃。
• 在打开多个属性面板的情况下更改语言时，WWB不再崩溃。
• 在调整Timeline通道选择器的大小时，WWB不再崩溃。
• 从目录视图中选择AXT400行时，WWB不再崩溃。

性能

• 提高了加载演出记录文件的速度。
• 提高了加载“设置冲突”对话并使设备重新联网的速度。
• 提高了在监控视图中创建通道条的速度。
• 提高了当Timeline和Mini-Timelines记录大量通道时，CPU的利用率。

网络

• 改进了macOS上的网络接口对话框，以显示实际的网络接口卡名称。
• 现在，应用程序主窗口右下角的网络状态是一个按钮，将打开应用程序网络首选项。
• 远程设备列表进行了改进，以便多选或取消选择IP地址。

目录

• 对于频带X7和H19，SLX主列表频段的发射机功率电平不再为空白。
• AXT400属性面板和目录属性侧边栏进行对齐，以按相同的顺序显示属性。
• ULX-D扫描锁定和同步锁定划分为两个不同的属性，可从目录属性侧边栏和属性面板中访问。
• 在目录侧边栏和属性面板中添加了PSM1000 IR预设。

频率协调

• 更新了适用于以下国家/地区的电视频道数据：

          奥地利

          澳大利亚

          荷兰

          波兰

          美国

• 在“电视频道”对话框中添加了电视发射机功率电平。
• 添加了在Coordination Chooser中调整列大小和重新排序的功能。
• 现在，演出记录文件可以保存近期扫描的选择标记状态。

监控

• 添加了分配给Dante域的ULX-D的网络状态指示。
• 在ULX-D和Axient Digital设备的属性面板中，添加了Dante固件、硬件和引导程序版本。
• Axient Digital属性面板的下拉菜单中不再有文本被截断，并且垂直滚动条现在可以正确显示。
• 在应用程序首选项中启用音频过载保持后，通道条和属性面板中的音频电平表将不再卡住。
• 在某个场景中，频率分集(FD)模式下的通道不再被另一个通道条覆盖。

Timeline

• Timeline文件现在包括它们的视图设置，从而在加载文件时使用保存的视图配置。
• 在更改语言后，所选的通道数不再重置为零。
• 在监视器视图的自动视图模式下，Mini-Timeline图不再相互重叠。
• 在Timeline中，PSM1000左右音频电平数据流不再相互重叠。
• 现在，重新启动Timeline录制将在所有频率分集(FD)模式下保留Timeline设置。

基本规格

• 改进了“区域管理器”>“配置”选项卡的用户界面，以在选中区域的列或行时突出显示相关区域。
• 在“区域管理器”>“配置”选项卡中添加了一个选项，用于为选定区域选择全部或取消选择全部间距选项。
• 将U.S. 600MHz Conversion Tool更改为Frequency Band Conversion Tool。
• 改进了整个应用程序的按钮样式。