软件和固件存档

Hotfix

Important

• This version is a hotfix for use in systems with CU 6105, CU 6110 and DIS-CCU Central Units only
• This version cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version is compatible with SW6000 Software License file v1.7 only
  • If upgrading from SW6000 v6.0.xxx or later, a new SW6000 license is not needed
  • If upgrading from SW6000 v5.8.xxx or earlier, a new SW6000 license is needed

Bug Fixes

CUA

• Fixed an error where Pause / Resume meeting did not restore request list in the correct sorting order
• Fixed an error where Pause / Resume meeting did not restore all entries in the request list

Version 6.5.25

Release Date: 6/23/2017

Feature Release

Important

• This version is a feature release for use in systems with CU 6105, CU 6110 and DIS-CCU Central Units only
• This version cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version can upgrade SW6000 from all previous SW6000 versions
• This version is compatible with SW6000 Software License file v1.7 only
  • If upgrading from SW6000 v6.0.xxx or later, a new SW6000 license is not needed
  • If upgrading from SW6000 v5.8.xxx or earlier, a new SW6000 license is needed

New Features

• Added speech counter in CUA Microphone and Main display
• Added speech counter configuration in CAA/Participant List Configuration
• Added option to configure the voting mimic icons used in the CDA
• Added configuration option in CAA/Configuration/Voting Configuration
• CAA: Report generation time reduced (all reports)
• CDA: Added command-line option to disable page switching
• CUA: Button configuration for speak button and voting buttons color added in the ‘prjCUA.exe.config’ file

Bug Fixes

CUA

• Fixed an error
  • where Pause / Resume meeting did not restore request list
  • for missing Meeting Role information in CUA after using CAA Conference Unit ‘Replace Unit’
  • where CUA Mimic shows assigned user in the meeting mode: ‘Code On List
  • where the Microphone in ‘Manual + reply’ mode cannot be not removed from request list when turned on from Mimic and Mic. ext. control
  • where the manual timer updates anomaly
  • where a participant cannot re-login
  • where the Meeting Role is not updated properly in CUA when Speaker is set for an agenda subject
  • where the buttons ‘Set agenda status’ do not have their own labels (3 labels)

CAA

• Fixed errors with
  • the agenda, when assigning a speaker to an Agenda Subject in a Meeting
  • Room Configuration. Meeting Role is not being applied to a unit
  • Voting reports - individual participants are listed multiple times each
  • Voting reports - missing some results from proxy delegates
  • participants votes, which are ignoring the use of voting weight
  • Label 507, which is used in some wrong places
  • Participant Table, unable to clear Replacement For …..
  • duplicated user ID in Prepared Participant List
  • printing reports from CUA
  • editing a Participant Seat Table
  • the Participant Seat Table, where participants cannot be moved from one seat to another in the table
  • the language selection menu 'Invariant Language (Invariant Country)
  • an CAA Exception: when adding participants in Meeting Mode: Prepared Participant List
  • importing the ‘Default Participant Table’ to a ‘Prepared Participant Table’

CDA

• Fixed an error
  • with Logged In display: Wrong Group shown for meeting using’ Participants Lists’
  • with Microphone Display: Pause speech timer indicator missing
  • with Microphone Display: Speech time count down timer keeps on blinking, red color does not stop after time has run out or the meeting is stopped
  • with font size in skin editor

CUI

• CUI Fix for Web service exception with very large agenda: Maximum request length exceeded
• ‘Pooltime’ default value changed to 200ms (can also be set in command line). Note: This time shall still be set using CUI command line parameter for customers using automatic login on preferred seat in large system

Reports

• Participant Meeting Report, ID 1243 – Fix for show time for non-participating participants
• Participant Statistical Report - Fix for incorrect if changes occur while CAA is open with active meeting
• Participant Statistical Report - Participant Speech Time is not updated properly
• Meeting Log report – sub repor6t parameters missing Vote report(s) with Groups - missing 'No Group' in Group Voting Result table Meeting Log Report - generation failed (on Russian database)

Installer

• Prevent installing on systems where SQL server version is 2005 or earlier

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

New Features

• AES67
• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Configuration
  • PEQ tab added
  • Revised templates for better out-of-the-box room coverage
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Improved auto position performance
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• MXA910: User Guide | Command Strings
• MXA910 version 2.0.8 is compatible with MXA910 devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA910 version 2.0.8 with Dante™ Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • "Add/Remove Channel" button added on Coverage tab
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New command strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Encryption may become disabled in an extremely rare case after a power cycle of the device; users must re-enable encryption in the UI if this occurs.
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• MXA310: User Guide | Command Strings
• MXA310 version 2.0.7 is compatible with MXA310 devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA310 version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4OUT: User Guide | Command Strings
• ANI4OUT version 2.0.8 is compatible with ANI4OUT devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4IN: User Guide | Command Strings
• ANI4IN version 2.0.7 is compatible with ANI4IN devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4IN version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • "Add/Remove Channel" button added on Coverage tab
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New command strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Encryption may become disabled in an extremely rare case after a power cycle of the device; users must re-enable encryption in the UI if this occurs.
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• MXA310: User Guide | Command Strings
• MXA310 version 2.0.7 is compatible with MXA310 devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA310 version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4OUT: User Guide | Command Strings
• ANI4OUT version 2.0.8 is compatible with ANI4OUT devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4IN: User Guide | Command Strings
• ANI4IN version 2.0.7 is compatible with ANI4IN devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4IN version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

NEW FEATURE

Initial release

NOTES

• To operate SBRC version 1.0.1 devices with other Shure software, see the following list of minimum versions:
  • Wireless Workbench 6.12.1
  • Shure Update Utility 2.3

Improvements

• Added support for Axient Digital receivers and AD series transmitters, including:
  • AD1/2 Bodypack and Handheld Transmitters
  • AD4D Dual Receiver
  • AD4Q Quad Receiver
  • AD610 Diversity ShowLink Access Point
• Added support for the following new devices/bands:
  • ULX-D ULXD6/8 Boundary and Gooseneck Transmitters
  • SBC450/850 Networked Charging Stations (featuring redesigned properties panels)
  • BLX H62
  • PSM300 H62
  • PSM900 G62
  • PSM1000 G62
  • QLX-D G62
  • SLX H62
• Added prompt in Preferences > Coordination to enable User Group for countries that support them

Known Issues

• Installing & Upgrading
  • Version 6.12.2 requires a 64-bit system. To install Wireless Workbench 6 on a 32-bit system, install and run version 6.12.0.88: Windows 7, 8, 10 or Mac OS X 10.9-10.11
  • Windows users attempting to install version 6.12.2 or later may  see an error message mentioning a missing .dll file(s). Users should  contact their computer's Administrator to ensure the computer has the  necessary libraries configured in order to install Wireless Workbench.
  • Checking for Wireless Workbench 6 updates using Shure Update  Utility 2.2.2.8 will not detect new versions of Wireless Workbench.  Download the latest version of Shure Update Utility
  • If you are running the Mac OS X Yosemite Operating System, be sure  to run version 10.10.4 or later. Earlier beta versions of the Operating  System are not supported.
• When connecting to AXT400, AXT610, and AXT transmitters across  subnets (as Remote Devices), ShowLink connectivity between the  transmitter and other components is not fully functional. Linked  transmitter status from the vantage point of the receiver and the Access  Point will show as not connected.
• On Macs, when users open show files and launch the Frequency  Analysis dialog (by checking the checkbox and pressing “Analyze”), the  Frequency Coordination tab may stop responding to keyboard inputs (for  example, editing or deleting frequencies with the keyboard). To work  around this issue, select another tab in the application (e.g.:  Inventory or Monitor) and then reselect the Frequency Coordination tab.
• SLX and ULX frequencies in Master List mode cannot be manually  entered in the Coordination Workspace. They can, however, be coordinated  and analyzed.
• When scanning with AXT400 receivers, the Band Preset value in the  Live Scan Settings dialog does not always stay in sync with the  currently selected band of the receiver. The Band Preset can be manually  changed to scan any supported range.
• Alerts logged when devices first come online may list device  parameters and their values as they are being discovered even though the  parameter values themselves have not changed.

Notes

• Tags that have been added to a show file, but are not assigned to any devices, are not saved within the show file.
• Opening show files created with older versions of Wireless  Workbench may result in the Settings Conflicts dialog opening once the  file has loaded, which is due to newly supported hardware parameters  that have been introduced with updated firmware versions. To maintain  all settings from the show file, select "Keep all settings from:  Wireless Workbench".
• On machines running Windows 7, Wireless Workbench will not discover  devices when the machine has fallen back to its 169.254.xxx.yyy  fallback IP address, regardless of the IP addresses of the connected  Shure devices. To resolve this, perform one of the following:
  • Insert a DHCP server onto your network and set your machine and Shure devices to accept automatic IP addresses.
  • Statically assign your machine's IP address to the 169.254.xxx.yyy  fallback subnet with a different IP address than the one it fell back  to originally.