软件和固件存档

Improvements

• Support for additional RF bands:
  • Thailand: 694 – 703 MHz frequency band (M19)
  • Thailand: 748 – 758 MHz frequency band (Q12)
• Improved user interface interactions for transmitter power level
• Improved battery runtime accuracy for 900 MHz ISM bands
• Bug fixes

Notes

• User Guide
• To operate ULX-D version 2.4.9 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.8
  • Axient AXT600 Spectrum Manager 2.1.22
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Improvement 

• Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.

Known Issue 

• SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes 

• SBC250 User Guide
• SBC450/850 User Guide
• To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
  1. Place transmitters on a charging station and ensure the charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.
• To operate SBC250/450/850 version 2.4.9 with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.4.9
  • QLX-D QLXD4 Receivers 2.3.8
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

新功能

操作系统级别警报通知：“硬件警报”和“干扰事件”功能增强，即使在Wireless Workbench最小化的情况下，用户也能通过操作系统接收通知。

• 对于Mac用户，Wireless Workbench警报和事件将显示在右上方、带有操作系统级别的通知，并且可以在“通知中心”查看。
• 对于Windows用户，Wireless Workbench警报和事件将显示在系统任务栏右下方、带有操作系统级别的通知，并且可以在“操作中心”查看。

改进功能

• 增加了对macOS Catalina（10.15版本）的支持

新设备和频段支持

• 增加了对新舒尔频段的支持

          H22 for PSM1000

          H22 for PSM900

          Axient Digital：X56和Z16

          SVX：H14和G15

          BLX：H10E和J11

• 增加了对Sennheiser Digital 6000的支持
• 增加了对AKG DMS800的支持

稳定

• 在某个场景中，更改频率分集(FD)模式时，WWB不再崩溃。
• 从Timeline中选择ULX-D的某些频段时，WWB不再崩溃。
• 在某个场景中，删除离线设备时，WWB不再崩溃。
• 在打开多个属性面板的情况下更改语言时，WWB不再崩溃。
• 在调整Timeline通道选择器的大小时，WWB不再崩溃。
• 从目录视图中选择AXT400行时，WWB不再崩溃。

性能

• 提高了加载演出记录文件的速度。
• 提高了加载“设置冲突”对话并使设备重新联网的速度。
• 提高了在监控视图中创建通道条的速度。
• 提高了当Timeline和Mini-Timelines记录大量通道时，CPU的利用率。

网络

• 改进了macOS上的网络接口对话框，以显示实际的网络接口卡名称。
• 现在，应用程序主窗口右下角的网络状态是一个按钮，将打开应用程序网络首选项。
• 远程设备列表进行了改进，以便多选或取消选择IP地址。

目录

• 对于频带X7和H19，SLX主列表频段的发射机功率电平不再为空白。
• AXT400属性面板和目录属性侧边栏进行对齐，以按相同的顺序显示属性。
• ULX-D扫描锁定和同步锁定划分为两个不同的属性，可从目录属性侧边栏和属性面板中访问。
• 在目录侧边栏和属性面板中添加了PSM1000 IR预设。

频率协调

• 更新了适用于以下国家/地区的电视频道数据：

          奥地利

          澳大利亚

          荷兰

          波兰

          美国

• 在“电视频道”对话框中添加了电视发射机功率电平。
• 添加了在Coordination Chooser中调整列大小和重新排序的功能。
• 现在，演出记录文件可以保存近期扫描的选择标记状态。

监控

• 添加了分配给Dante域的ULX-D的网络状态指示。
• 在ULX-D和Axient Digital设备的属性面板中，添加了Dante固件、硬件和引导程序版本。
• Axient Digital属性面板的下拉菜单中不再有文本被截断，并且垂直滚动条现在可以正确显示。
• 在应用程序首选项中启用音频过载保持后，通道条和属性面板中的音频电平表将不再卡住。
• 在某个场景中，频率分集(FD)模式下的通道不再被另一个通道条覆盖。

Timeline

• Timeline文件现在包括它们的视图设置，从而在加载文件时使用保存的视图配置。
• 在更改语言后，所选的通道数不再重置为零。
• 在监视器视图的自动视图模式下，Mini-Timeline图不再相互重叠。
• 在Timeline中，PSM1000左右音频电平数据流不再相互重叠。
• 现在，重新启动Timeline录制将在所有频率分集(FD)模式下保留Timeline设置。

基本规格

• 改进了“区域管理器”>“配置”选项卡的用户界面，以在选中区域的列或行时突出显示相关区域。
• 在“区域管理器”>“配置”选项卡中添加了一个选项，用于为选定区域选择全部或取消选择全部间距选项。
• 将U.S. 600MHz Conversion Tool更改为Frequency Band Conversion Tool。
• 改进了整个应用程序的按钮样式。

BUG FIXES

• USB mute sync improvements
• General bug fixes

NOTES

• User Guide
• Command Strings
• To operate P300-IMX version 3.1.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate P300-IMX version 3.1.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 3.2
  • Shure SystemOn 3.2
  • ANI22 2.0.18
  • ANIUSB-MATRIX 3.1.6
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 3.1.6
  • MXA910 4.0.12
  • Microflex Wireless 6.0.3
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5

IMPROVEMENTS

• Bug fixes

NOTES

• User Guide
• MV88+ User Guide
• Compatible with Android 6.0 and higher.
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.

Improvements

• Improved reporting of battery errors

Notes

• Command Strings
• To operate SBRC version 1.1.5 with other Shure software, see the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Wireless Workbench 6.13.0

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

These release notes cover the following models:

• MXCWAPT Access Point Receiver
• MXCW640 Wireless Conference Unit
• MXCWNCS Networked Charging Station

IMPROVEMENT

• Fixed a bug on the MXCWAPT where seat number-based TPCI commands fail to provide property updates after the APT is rebooted in manual registration mode

KNOWN ISSUES

MXCWAPT

• Mute Concealment is not implemented in the interpretation channels. This feature will be available in the next release.

MXCWAPT Component GUI

• General note: Clear browser cache (Shift+control+F5 on Windows) after the firmware update is done if you are already in the GUI at the time of the update.
• Browser refresh may be required in the following situations:
  • On a Static/DHCP IP configuration change
  • If MXCW640s lose sync with GUI during registration, deregistration, or reboot
  • If GUI intermittently incorrectly shows some MXCW640s remained offline
• There’s an intermittent issue where voting results are shown in the Display View even if the display icon is enabled through the Chairman View. Users may need to refresh their browser to resolve.
• During some system factory resets, the APT’s reset initiation may be delayed ~2 minutes, in comparison to the MXCW640s.
• Pinned seat numbers are not cleared after APT reboot in Auto+Open Connection Mode.
• APT Help topics are not available in Thai, Turkish, and Lithuanian.
• Some translated text is misaligned or may have extra, unnecessary punctuation or text.
• Component GUIs take longer to load in Internet Explorer than Google Chrome, especially if used in a large system.

MXCW640

• Some languages experience text issues.
• Some text is not translated.

MXCWNCS

Users may need to refresh their browser on a Static/DHCP IP configuration change.

APT Help topics are not available in Thai, Turkish, and Lithuanian.

NOTES

• User Guide
• To use MXCW version 2.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.5
  • Shure Web Device Discovery 1.2.5
  • Shure NFC Programming Application 1.0.3

改进功能

• 修复漏洞
• 修复画外音

已知问题

• 一小部分用户在记录时可能会收到数字错误消息，例如“-1”或“66570”。这些消息发生在设备写入出错时，并且与苹果的新文件系统(APFS)有关。即使您的设备有足够的剩余存储空间，也可能发生这些错误之一。我们建议从设置界面清除你的设备存储，如果这还不能解决问题，从iTunes做一个完整的恢复，包括备份你的设备，清除/恢复到出厂设置，并从备份中恢复。
• 如果你用蓝牙耳机监听你的录音，你可能会在监听时听到人为的声音，比如噪音。如果发生这种情况，我们建议改变您的录音采样率。一些产品可能产生44.1kHz的人工制品，而其他产品可能产生48kHz的录音制品。请记住，即使您在监视时听到了工件，它们也不会出现在录音本身中。
• 当通过USB-C线缆连接到iPad Pro时，MV88+将通过音频并可调整增益。然而，MOTIV应用程序将只显示“外部麦克风”，设置屏幕将不可用。Shure建议在使用iPad Pro之前，先使用另一台设备来配置这些设置。使用iPad Pro时，Shure MOTIV应用程序不能实时调整(增益除外)。

说明

• MV88+ 用户手册
• MV88 用户手册
• 常见问题
• 本应用程序兼容iOS 11.3或更高版本，但强烈建议升级到iOS 12.1或更新版本
• 兼容iPhone、iPad和iPod touch