软件和固件存档

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4IN version 2.0.18 is compatible with ANI4IN devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4IN version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4IN version 2.0.18 is compatible with ANI4IN devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4IN version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4OUT version 2.0.18 is compatible with ANI4OUT devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4OUT version 2.0.18 is compatible with ANI4OUT devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.

Notes

• User Guide
• ANIUSB-MATRIX version 2.0.19 is compatible with ANIUSB-MATRIX devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANIUSB-MATRIX version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• User Guide
• Command Strings
• MXA310 version 2.0.19 is compatible with MXA310 devices running version 2.0.19 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• User Guide
• Command Strings
• MXA310 version 2.0.19 is compatible with MXA310 devices running version 2.0.19 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• MXA910 version 2.0.19 is compatible with MXA910 devices running version 2.0.19 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA910 version 2.0.19 with Dante™ Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • Designer 3.0
  • MXA310 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

更新：SystemOn 3.0.1支持更新到2.3.4的ULX-D设备，但不支持2.3.4版本上的ULX-D的新硬件版本。

已知问题

对于不支持的固件版本，SystemOn 3.0.1会错误发出警告“Check system requirements, your current firmware version may not be confirmed compatible”（检查系统要求，当前固件版本可能无法确认兼容）。

要在舒尔无线系统中使用SystemOn 3.0.1，请参考下表以了解所支持的固件版本：

• SCM810 1.3.3
• ULX-D 1.7.34 - 2.3.4

          o   ULX-D J50A or L50A frequency bands are not supported

          o   不支持ULX-D J50A或L50A频段

          o   ULX-D new hardware revisions are not supported

          o   不支持ULX-D新硬件版本 

• MXW 4.0.6 – 6.0.3

更新：2018年10月30日：SystemOn 3.0.1支持MXW 6.0.3版本；但是，会错误发出警告“Check system requirements, your current firmware version may not be confirmed compatible.”（检查系统要求，当前固件版本可能无法确认兼容。）

要在舒尔无线系统中使用SystemOn 3.0.1，请参考下表以了解所支持的固件版本：

• SCM820 1.3.3
• SCM820 1.3.3
• ULX-D 1.7.34 - 2.2.24
• ULX-D 1.7.34 - 2.2.24

          o   ULX-D J50A or L50A frequency bands are not supported

          o   不支持ULX-D J50A或L50A频段

• MXW 4.0.6 – 6.0.3
• MXW 4.0.6 – 6.0.3

更新：SystemOn将通知用户ULX-D 2.2.24可能不兼容；然而，只有J50A或L50A频带上的ULX-D设备与SystemOn 2.0-3.0.1不兼容。

更新：

• SystemOn 3.0.1支持MXW 5.2.2；但是，SystemOn会错误发出警告“Check system requirements, your current firmware version may not be confirmed compatible.”（检查系统要求，当前固件版本可能无法确认兼容。）请忽略此警告。
• MXW 5.2.2解决了以前的一个问题，即发现MXW话筒可能需要一分钟以上。
• 对SystemOn 3.0.1进行了改进，之前报告缺少设备所需的时间增加到了3-4分钟，现在可能维持在1分钟。

Upgrades and Licenses

• This version is used to upgrade from all previous SW6000 versions, however it cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version is compatible with SW6000 Software License file v1.7 only
• No new SW6000 license is needed if upgrading from SW6000 v6.0.xxx or later versions
• A new SW6000 license is needed if upgrading from SW6000 v5.8.xxx or previous versions

New Features

CAA

• Agenda item durations added - meeting start time used for agenda item start time
• Added Email field to Participants table
• Vote results tab in Agenda is now available if license SW6000-VOTE is available – dependency is removed from license SW6000-ADV

CUA

• Agenda screen displays start time for agenda items (CUA config dependent)
• Added Agenda Time extension control – enabling ‘Auto Update’ feature - Agenda item start time and start time for subsequent agenda items is updated when the subject is set active first time
• Manual Entered Vote results now support 'Unanimous' voting

Beta support for Pre-request to Speak

• Those features require that two dll's are copied to the "Conference Administrator Application\ImportExport" folder (Newtonsoft.Json.dll WebMeetingIntegration.dll).

CAA

• Agenda – support for pre-meeting speak requests for agenda items

CUA

• Agenda – setting an agenda item active populates the pre-meeting request list for the agenda item

Beta support for MXC products

CAA

• Support for ACR1281U-C1 Dual programmer (programs dual interface cards with NFC/Chip interface and CC 6010 cards with Chip interface)
• Support for ACR1252U-M1 (programs dual interface cards with NFC/Chip interface)

CUI

• Beta support for MXC615/MXC620/MXC630 units

Bug Fixes

This section lists the major bugs, where corrections have been made.

Installer

• Fixed a Customer Reported database upgrade error – Collation error

CUA

• Fixed an error
  • where the Microphone speak button state could get out of sync if a replace unit was done including an open microphone unit
  • where scrolling up/down in a large agenda can end up where the line separating the subjects is not being displayed
  • where using the CAA to change speak priority for a meeting role with no active meeting
  • can cause a CUA exception – displayed in system messages
  • where the Last 5 speakers list should be cleared on conference start/stop
  • where the Group speech time is not updated correctly after pause and resume of a meeting
  • where the Total Seat value displayed can be incorrect. Number of seats in seat table used by a meeting is displayed – technician seat types should be excluded in count
  • where the text color for result values is hardcoded – should be configurable
  • when using the mimic to log in a user, the suggested roles for a selected participant is taken from the participant table – should be taken from participant seat table if a table is used for the meeting. Login pop-up should be centred on mimic – placed on top of CUA if mimic is moved to secondary screen
  • where the name displayed for a participant does not reflect the meeting role if the participant is logged in using a different meeting role from the mimic
  • for a meeting with a participant list, where a participant that’s logged out from the mimic is not added to the ‘Participants not present’ list
  • where a participant in the Microphones Control -> Participant List -> Participant Info is displayed with incorrect show name if the participant has been logged in with a Participant Role other than the default for the participant. Resolution is to only show participant name in Participant Info
  • where a participant in the Microphones Control -> Participant List logged in with no speaking rights are not displayed in this. Same problem when no conference is active for microphone units with no speaking right assigned

CAA

• Fixed an error
  • where deleting all CDA displays can make it impossible to add a new CDA display
  • in the Conference Log report, where the report does not show speaker stop time, if speaker was active at meeting stop
  • where the subject title in Agenda Master/Detail view of agenda is not in sync
  • allowing the user to enter special characters in search field in Labels screen
  • in various screens with filter functionality – [Delete] button must be disabled when the search has no results
  • in Meeting Displays (CDA) where filtering and adding a new CDA display, while filter has no results, can result in a blank entry when filter is removed
  • in Meeting Displays (CDA) where the Update button is not enabled when changing values for numeric controls – e.g. instance
  • in various screens with filter functionality – Support using special characters in filter)
  • in various labels e.g. Delegate (User Type) is changed to Participants (Meeting Role) in speech time configuration
  • where a meeting re-import should not overwrite a stop date configured as future date
  • making the filter to correctly filter on start/stop date of meetings
  • in the Subject Vote Report, where Group sorting must be taken into account
  • in the Conference Units window, where clicking Add Unit after doing a microphone scan results in an error
  • in the Participant Table Window, where using the button [Generate] for the field Login Code, correctly generates a new login code, but entry is not marked as updated and the [Update] and [Cancel] buttons are not enabled

Notes

SW6000 and DCS 6000 Compatibility Chart