软件和固件存档

RECOMMENDATION

Update all Microflex® Advance™ microphones and Audio Network Interfaces in a configuration to the same firmware version.

IMPROVEMENTS

• Push to Dante feature now appends a -d to the Dante Device Name, preventing discovery issues
• Bug fixes

KNOWN ISSUE

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

NOTES

• MXA310 version 1.2.6 is compatible with microphones running version 1.2.6 and below, but it is recommended to update all devices used together to the same firmware version.
• For operation of MXA310 version 1.2.6 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 1.1.6
  • ANI4OUT 1.1.6
  • MXA910 1.1.3
  • Microflex Wireless 4.0.7
  • ULXD4 1.7.34
  • ULXD4Q 1.7.34
  • SCM820 1.3.3
  • Shure Update Utility 2.2.2
  • Shure Web Device Discovery 1.0.18

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

Improvements

• Push to Dante feature now appends a -d to the Dante Device Name, preventing discovery issues
• In Custom Automix Mode, Echo Reduction selections are properly applied
• TPCI command DEV_LED_IN_STATE now responds to a GET
• Bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• MXA910 version 1.2.6 is compatible with microphones running version 1.2.6 and below, but it is recommended to update all devices used together to the same firmware version.
• For operation of MXA910 version 1.2.6 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 1.1.6
  • ANI4OUT 1.1.6
  • MXA310 1.1.4
  • Microflex Wireless 4.0.7
  • ULXD4 1.7.34
  • ULXD4Q 1.7.34
  • SCM820 1.3.3
  • Shure Update Utility 2.2.2
  • Shure Web Device Discovery 1.0.18

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

New Feature

• A device-wide, low-frequency filter can now be enabled with a new Low-shelf Filter button on the browser-based web application.

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• This optional update makes installation and configuration more efficient when running independent channels into processing hardware, such as an echo canceller or automixer, to reduce low frequency buildup when channels are summed. This update is unnecessary for MXA910 microphones that are already installed and well-configured, and may require the user to disable the low frequency filter if updated.
• MXA910 version 1.3.4 is compatible with microphones running version 1.2.6 and below.
• For operation of MXA910 version 1.3.4 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 1.2.6
  • ANI4OUT 1.2.6
  • MXA310 1.2.6
  • Microflex Wireless 4.0.7
  • ULXD4 1.7.34
  • ULXD4Q 1.7.34
  • SCM820 1.3.3
  • Shure Update Utility 2.2.2
  • Shure Web Device Discovery 1.0.18

IMPORTANT

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

• Support for new VHF frequency bands:
  • V50
  • V51
• Update to the low-battery alert:
  • The receiver LCD reports the transmitter low-battery status by flashing the LCD on the receiver.
  • Threshold to trigger the alert
    • SB900: less than 30 minutes
    • Alkaline: around 30 minutes
    • NiMH and Lithium: around 20 minutes
  • Alert can be disabled via the advanced menu on the receiver. To enter the advanced menu, press the enter and menu buttons together.
• Improved audio stability in marginal RF conditions

NOTES

• For discovery of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 2.0.16:
  • Wireless Workbench 6.12.0.88
  • ULX-D receiver 2.0.19
  • AXT600 Spectrum Manager 1.15.3
  • PSM1000 Transmitter 1.3.12
• For operation of QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on 2.0 firmware or later.

IMPORTANT

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

• Support for new VHF frequency bands:
  • V50
  • V51
• Update to the low-battery alert:
  • The receiver LCD reports the transmitter low-battery status by flashing the LCD on the receiver.
  • Threshold to trigger the alert
    • SB900: less than 30 minutes
    • Alkaline: around 30 minutes
    • NiMH and Lithium: around 20 minutes
  • Alert can be disabled via the advanced menu on the receiver. To enter the advanced menu, press the enter and menu buttons together.
• Improved audio stability in marginal RF conditions

NOTES

• For discovery of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 2.0.16:
  • Wireless Workbench 6.12.0.88
  • ULX-D receiver 2.0.19
  • AXT600 Spectrum Manager 1.15.3
  • PSM1000 Transmitter 1.3.12
• For operation of QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on 2.0 firmware or later.

IMPORTANT

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

• Support for new VHF frequency bands:
  • V50
  • V51
• Update to the low-battery alert:
  • The receiver LCD reports the transmitter low-battery status by flashing the LCD on the receiver.
  • Threshold to trigger the alert
    • SB900: less than 30 minutes
    • Alkaline: around 30 minutes
    • NiMH and Lithium: around 20 minutes
  • Alert can be disabled via the advanced menu on the receiver. To enter the advanced menu, press the enter and menu buttons together.
• Improved audio stability in marginal RF conditions

NOTES

• For discovery of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 2.0.16:
  • Wireless Workbench 6.12.0.88
  • ULX-D receiver 2.0.19
  • AXT600 Spectrum Manager 1.15.3
  • PSM1000 Transmitter 1.3.12
• For operation of QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on 2.0 firmware or later.

IMPORTANT

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

• Support for new VHF frequency bands:
  • V50
  • V51
• Update to the low-battery alert:
  • The receiver LCD reports the transmitter low-battery status by flashing the LCD on the receiver.
  • Threshold to trigger the alert
    • SB900: less than 30 minutes
    • Alkaline: around 30 minutes
    • NiMH and Lithium: around 20 minutes
  • Alert can be disabled via the advanced menu on the receiver. To enter the advanced menu, press the enter and menu buttons together.
• Improved audio stability in marginal RF conditions

NOTES

• For discovery of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 2.0.16:
  • Wireless Workbench 6.12.0.88
  • ULX-D receiver 2.0.19
  • AXT600 Spectrum Manager 1.15.3
  • PSM1000 Transmitter 1.3.12
• For operation of QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on 2.0 firmware or later.

IMPORTANT

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

• Support for new VHF frequency bands:
  • V50
  • V51
• Update to the low-battery alert:
  • The receiver LCD reports the transmitter low-battery status by flashing the LCD on the receiver.
  • Threshold to trigger the alert
    • SB900: less than 30 minutes
    • Alkaline: around 30 minutes
    • NiMH and Lithium: around 20 minutes
  • Alert can be disabled via the advanced menu on the receiver. To enter the advanced menu, press the enter and menu buttons together.
• Improved audio stability in marginal RF conditions

NOTES

• For discovery of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 2.0.16:
  • Wireless Workbench 6.12.0.88
  • ULX-D receiver 2.0.19
  • AXT600 Spectrum Manager 1.15.3
  • PSM1000 Transmitter 1.3.12
• For operation of QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on 2.0 firmware or later.

IMPORTANT

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

• Support for new VHF frequency bands:
  • V50
  • V51
• Update to the low-battery alert:
  • The receiver LCD reports the transmitter low-battery status by flashing the LCD on the receiver.
  • Threshold to trigger the alert
    • SB900: less than 30 minutes
    • Alkaline: around 30 minutes
    • NiMH and Lithium: around 20 minutes
  • Alert can be disabled via the advanced menu on the receiver. To enter the advanced menu, press the enter and menu buttons together.
• Improved audio stability in marginal RF conditions

NOTES

• For discovery of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 2.0.16:
  • Wireless Workbench 6.12.0.88
  • ULX-D receiver 2.0.19
  • AXT600 Spectrum Manager 1.15.3
  • PSM1000 Transmitter 1.3.12
• For operation of QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on 2.0 firmware or later.

改进功能

• 增加与ULX-D固件版本2.0.19的兼容性
• 提升性能

已知问题

• 在通道名称中使用字符{or}后，“通道名称”字段显示为灰色，在大约10秒钟内不能再更改。
• 在Microflex Wireless MXW1的“设备属性”中，“固件版本”字段错误地显示固件版本可能不兼容。
• 当在ULXD4/D/Q上激活访问控制时，接收机在SystemOn 2.1中不可见。
• SystemOn 2.1不提供远程Microflex Wireless发射机链接。未来的软件更新中将会提供此功能。
• SystemOn 2.1不提供Microflex Wireless音频和射频计量信息。未来的软件更新中将会提供此功能。
• UTC时间和日期会显示在“事件日志”和“电子邮件/短信”通知上。
• 如果使用的许可激活ID有效，而首次尝试激活失败，请在拨打支持热线之前再试一次。
• 监视小工具可能在短时间内针对Microflex Wireless (MXW)和ULX-D话筒显示错误字符。
• 某些语言可能显示截断的字词或句子。

说明

• 要在舒尔无线系统中使用SystemOn 2.1，请参考以下列表以了解SystemOn 2.1支持的固件版本：
  • SCM820 1.3.3
  • ULX-D 1.7.34 - 2.0.19
  • MXW 4.0.6 - 4.0.7
• 如果在Internet Explorer和Microsoft Edge浏览器上使用SystemOn 2.1时遇到任何性能问题，请联系舒尔亚洲支持中心。