MXWAPX4 & MXWAPX8

Access Point Transceiver

Access Point Transceiver with 4 or 8 wireless audio channels for use with MXW neXt wireless transmitters.

MXWAPX4=-Z11: Access Point Transceiver with 4 wireless audio channels for use with MXW neXt wireless transmitters.
MXWAPX8=-Z11:Access Point Transceiver with 8 wireless audio channels for use with MXW neXt wireless transmitters.

Product Details

  • Analog, Dante, and USB-C audio connections.
  • Built-in IntelliMix DSP audio processing with automatic mixing, echo cancellation, noise reduction, automatic gain control, and EQ.
  • Automatic Frequency Management scans the spectrum, selects a clear channel, and automatically changes channels if interference is expected.
  • Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation.
  • Dual RJ45 connection enable 3 network operation modes - Switched, Split, or Redundant.
  • The supplied mounting plate and paintable cover allow discreet placement on the ceiling or wall in boardrooms and conference rooms where low visibility is preferred.
  • Two-way wireless transmission allows for remote control of audio and transmission of a secondary program audio to each transmitter.
  • Multiple units can be combined to support configurations of up to 40 compatible channels and 80 in Europe and select countries (double in HD mode).
  • Supports standards-based security protocols to manage access and protect data, including 802.1x, secure boot/storage, and AES encryption for wired and wireless control and audio data.
  • Selectable RF output power to allow optimize spectrum usage by selecting the appropriate wireless output power for the desired operating range.
  • Diagnostic LEDs offer easy visual reference to system activity and indicate power, wireless connection, and network audio status.
  • A CUI can be accessed on a PC connected to the same network enabling access to all device properties for optimization and user specific settings.
  • MXWAPX4 -
  • Mounting Plate -
  • Quick-Start Guide -
  • Audio Connectors -
  • MXWAPX8 -
  • Mounting Plate -
  • Quick-Start Guide -
  • Audio Connectors -

Compatible Transmitters

MXW1X

Hybrid Bodypack Transmitter

Rechargeable transmitter for MXW neXt wireless systems; compatible with most Shure lavalier and headworn mics

MXW2X/BETA58

Handheld Transmitter with Beta58A Capsule

Rechargeable wireless handheld microphone with Beta58A capsule for MXW neXt wireless systems

MXW2X/SM58

Handheld Transmitter with SM58 Capsule

Rechargeable wireless handheld microphone with SM58 capsule for MXW neXt wireless systems

MXW2X/SM86

Handheld Transmitter with SM86 Capsule

Rechargeable wireless handheld microphone with SM86 capsule for MXW neXt wireless systems

MXW2X/VP68

Handheld Transmitter with VP68 Capsule

Rechargeable wireless handheld microphone with VP68 capsule for MXW neXt wireless systems

MXW6X

Boundary Transmitter

Rechargeable wireless table-top microphone for MXW neXt wireless systems; available with omnidirectional or cardioid microphone

MXW8X

MXW8X Desktop Based Gooseneck Transmitter

MXW8X Desktop Based Gooseneck Transmitter

Support

Customer Support

Service & Repair

Detailed policy information regarding customer service numbers, service modifications, and replacement parts.

Service & Repair

Contact Us

Submit a ticket directly to Shure Customer Service staff, or reach out via phone or email.

Contact Us

Resources

Shure Tech Portal

Complete product documentation, technical support materials, software and firmware, and other tools and resources for all Shure products, in one place.

Sign In launch

Software & Firmware

Designer 6

Designer System Configuration Software enables integrators and system planners to design, deploy and seamlessly commission installations of networked audio systems consisting of Microflex® Advance microphones, audio interfaces, IntelliMix® digital signal processors, Microflex loudspeakers, and control accessories. Completely reimagined and redesigned to simplify end-to-end workflows and enable intuitive layouts, Shure Designer 6 is effective application software designed to streamline operational efficiency.

SystemAPI

Application programming interface for controlling & monitoring a wide variety of product features and performance parameters for Shure devices – whether on premises or remotely. SystemAPI’s open architecture allows integration with 3rd party devices and platforms to enable comprehensive and customizable system management.